Home / Delve into the Depths in the Kobold Blog / Real Steel: VIDEO! Moon Hammer

Real Steel: VIDEO! Moon Hammer

Real Steel: VIDEO! Moon Hammer

Real Steel: Moon HammerOkay, okay, I promised the Danish axe next. Sorry it didn’t work out — we will do the axe real soon.

I think you’re gonna like this one! Sam and I had fun making both the moon hammer and the video.

So, How Do You Make a Moon Hammer?

It’s really simple. I took a 3” long piece of 1.125” inside diameter mild steel structural pipe with 0.1875” thick walls and MIG welded a 3.25” forged mild steel ball to it. I then drove a 24” length of 1.125” diameter white oak dowel into the pipe (it’s a really tight fit), drilled two holes, and peened in two copper pins for insurance. The whole thing weighs in at 6 lbs.

I will be putting some kind of handle treatment on it but haven’t decided yet whether to go with leather wrap or some kind of studs — or both.

I didn’t swing the moon hammer that hard and was kind of surprised at the results…

This covers the mace request, and we’ll do the Danish axe soon. I do plan a war hammer and war ’hawk soon also. Any other requests?

Yeah, I heard ya on the assorted fruit targets — we’re saving that for the edged weapons.

19 thoughts on “Real Steel: VIDEO! Moon Hammer”

  1. I would hate to be on the receiving end of it when you would swing it for (full) effect.

    If you can bust a brick with it you can bust a melon with it -> skulls are a mix – hard on the outside, soft on the inside :-)

  2. Todd, your MIG welding reference does trigger me to ask: how would one do a weld in medieval times? I’ve read something about using silver to weld stuff together, but for a mace that would make it somewhat expensive in my mind. Also, could a silver weld deal with the impact?

  3. Todd, ok, got it.

    How would a traditional forge weld deal with the shock of an impact? Or would you forge it differently => one piece instead of mixing two pieces?

  4. @Darkjoy – If it’s done right pieces that are forge welded become one piece and can handle stresses as if they were forged as a single piece. The old time blacksmiths were/are very skilled at this – much better than I. The moon hammer is my design and not traditional in any way. It could be forge welded but I designed it knowing I would MIG weld it.

    Forging a ball with a tube on the end would be a real challenge!

  5. Nice video. I was hoping for a bigger pile of bricks, but it was quite definitive.

    How heavy does 6 pounds seem when it is so heavily weighted at the end? Can you imagine swinging it around for more than a minute?

  6. @Kobold Quarterly – I was shocked at how easily it broke the brick – and the block was a surprise bonus also. I’ll do a video of a bigger pile of bricks and maybe we can post it as a bonus?

    It’s very front heavy – to be practicle it should weigh 2-3 pounds less. I think a couple of minutes swinging it would be exhausting. It’s easier to control than the tetsu no bo, but still not easy.

  7. How about a seax with the pattern welded blade? (I blame National Geographic and the really cool image of them pressing the two pieces together.)

    It named a whole people, so it can’t be all bad, eh? :D

  8. @Ben – I’ve been wanting to do a seax for myself for a while. No promises of when or if it will be pattern welded, but I will do one. Most likely not a langseax, but one never knows.

    :)

    It’s a simple and elegant form – I really like them.

  9. Suggestion for the future…. a glaive. Or a flail, esp the complex flail, three chains and three balls on the end.

    Been enjoying the series though. Thanks for doing them!

  10. @catdragon – I’m with you on the glaive – I have a design worked up – just need the time to forge it. I would love to do a flail, but I hesitate because I know people will want to buy them and they are SOOO dangerous. I’m still thinking about it.

    Thanks, I’m glad you’re enjoying the series, so am I.
    :)

    @Ben – I agree, and I built two last night with a smaller ball at the other end as well as an all steel haft. It makes a difference.

  11. If you have a scrapyard anywhere near you I’d suggest getting an old car door to bash on. Some tennis gloves might cut down on vibration into your hands also.

Leave a Comment

Your email address will not be published. Required fields are marked *

Join the Kobold Courier and Earn Loot!

Stay informed with the newest Kobold Press news and updates delivered to your inbox weekly. Join now and receive a PDF copy of Demon Cults & Secret Societies: Harbingers of the Yawning Void for 5th Edition (PDF)

Join The Kobold Courier

38878

Be like Swolbold. Stay up to date with the newest Kobold Press news and updates delivered to your inbox twice a month.

Pin It on Pinterest

Share This
Scroll to Top